Applicable Industries: Advertising Company
Gearing Arrangement: Worm
Output Torque: 2.6 to 1760
Input Speed: 700rpm, 1400rpm, 2800rpm
Output Speed: 7-560rpm
Color: Silver, blue, grey
Packing: Carton & Plywood case
Packaging Details: small carton for each gearbox plywood case(110*110*0.85m) for outside
Port: ZheJiang , HangZhou

Dear customer, we are ready to serve for you!

Main features of aluminum worm speed gearboxes
1. wide speed ratio range
2. small volume, low weight, occupying small space for mounting
3. high efficiency, high mechanical strength and high quality aluminum alloy housing
4. long life service, large output torque, low noise and little vibration
5. low temperature rise, omnibearing installation, easy to connect with other machinery
6. high carry ability, elegant appearance
7. CE standard, input power can be 0.18KW-15KW
8. stable transmission

Specifications

Type:
Good quality aluminum worm speed gearboxes HMRV090

Model:
HMRV

Ratio:
5:1, 7.5:1, 10:1, 15:1, 20:1, New Original CZPT or Advance Small Marine Diesel Engine With JT600 and HCT600 Marine Gearbox For Boat 25:1,
30:1, 40:1, 50:1, 60:1, 80:1, 100:1

Color:
Blue, Silver, Grey, Customised (Wet painting, oven painting)

Material:
Housing, cover, flange(size30-90): aluminum alloy
Housing, cover, flange(size110-150): cast iron

Worm gear: bronze for outside & nodular iron for inside

Worm shaft: 20CrMnTi with carburizing and quenching,
Surface harness: 56-62HRC

Output shaft: chromium steel-45#

Bearing: C&U brand, HCH brand

Oil Seal: NAK SKF

Packing:
Carton and Wooden Case

Warranty:
1 Year

IEC Flange:
56B5, 56B14, 63B5, High Quality industrial swc cardan shaft, drive shaft for rolling mill machine 63B14, 71B5, 71B14, 80B5, 80B14, 90B5, 90B14, 100/112B5, 100/112B14, 132B5

Lubricant:
Synthetic oil & Mineral oil

Our Services
We are top WORM GEAR reducer factory
Sell directly to clients to more than 20 countries including India, Turkey, Spain, Brazil, Russia, Poland, etc.
Our total sales revenue for 2014 was $10.5 MILLION USD.
Our products have CONSISTENT HIGH QUALITY and LOW PRICE. We have our own Aluminum Casting factory which guarantees the quality of the products and allow us to offer competitive price.
We do CUSTOMISED products.
Also, we are very nice people to deal with.
Welcome to VISIT OUR FACTORY!

Advantages of our factory
Advantage 1 — Alluminium Casting Machines & Test Facilities
The owner of HMRV factory, Mr Lu also has an aluminum die casting factory with 100% stock. This aluminum die casting factory is the best in our HangZhou. We produce HMRV housing, 1325 1530 fiber cnc cutting mini fiber laser cutting machine 1000w 1500W 2000W 3000W for carbon steel cover, flange and supply to other HMRV factory.

Advantage 2 — Sufficient Stock of Spares
To ensure our customer fast deliver time, we have sufficient stock of spares such as housing, cover, input flange, output flange, worm wheel, worm gear, oil seal, bearing.

Advantage Three — Best Machines in China
The owner of HangZhou Reducer, Mr Lu, is the sales representatives of the Chinese biggest tool equipment factory in ZHangZhoug province. He sells a lot of hobing machine, gridding machine, CNC machine and so on to other factory. As to the tool machines in our factory, all of them are equipment with best processing precision with solid technical support.

FAQ
Question One:
What infomation should I tell you to confirm the order?
A: Model/Size, Transmission Ratio, Shaft directions & Order quantity.

Question Two:
What if I don’t know which 1 I need?
A:Don’t worry, Send as much information as you can, our technical team will assist you to find the right model/size you are looking for.

Question Three:
How long should I wait for the feedback after I send the enquiry?
A: Within 12 hours

Question Four:
What should I provide if I want to order NON-STANDERD reducers?
A: Drafts, Dimensions, Customized Flat Belt Drive Pulley for flat belts Pictures and samples if possible.

The Different Types of Gearboxes

There are many different types of gearboxes. Some brands have more than one type. In this article, we’ll discuss the planetary gearbox, the worm reduction gearbox, the shaft mounted gearbox, and the one speed gearbox. This article will also help you determine which type of gearbox is best for your vehicle. And don’t worry if you don’t know the terminology yet. We’ll explain each type in detail so that you know what you’re getting yourself into.

Planetary gearbox

Planetary gears have many advantages. The multiple gears in a planetary gearbox mesh simultaneously during operation. As such, they provide high efficiency and transmit high transmittable torque. These gears are widely used in various industries and are resistant to high shock loads and demanding conditions. CZPT is one of the companies that offer planetary gearboxes. Its products do not require special tools for assembly, and its scalable design minimizes safety stock.
Among the numerous benefits of planetary gearing is its compactness and lightweight. As such, it is suitable for wide applications with space and weight constraints. However, to truly appreciate its benefits, it is necessary to understand its mechanisms. Here are some of the most common details about planetary gearing:
The planetary gearbox has two mounted gears: an input shaft and an output shaft. Each gear has multiple teeth that are attached to a carrier and rotate with the input shaft. The carrier is connected to the output shaft. A planetary gear is mounted on both gears via a carrier. The carrier rotates in order to drive the planetary gear. The sun gear is often the input gear. The other gear is called the outer gear.
Planetary gearboxes are highly customizable. The size, mounting, and housing options vary, as do the reduction ratios and input speeds. Different types can be manufactured for different applications and include options such as electrical or mechanical preload. The final design of a planetary gearbox can be highly customized, based on the specifications of the application. By combining engineering excellence and ongoing innovation, planetary gearboxes provide years of trouble-free operation.
A planetary gearbox can be either an electric motor or a manual one. The latter has more features than the former, and can be used in applications where space is an issue. The primary features of a planetary gearbox include its backlash, torque, and ratio. Secondary features include noise, corrosion resistance, and construction. A planetary gearbox is a highly versatile gearbox that can drive anything from simple machinery to advanced electrical systems.

Worm reduction gearbox

The global worm reduction gearbox market report compiles key insights from the industry to help you improve your business strategy. This report will help you create a comprehensive business document that will enhance your company’s competitive edge. To obtain this report, visit our website now! Read our latest report to find out what you can expect from the global worm reduction gearbox market. Alternatively, request a sample copy for more details. Here is a sneak peek of the report:
Worm gears are made with different thread counts and are usually not matched with the CZPT standard. In general, a single thread worm should be used with a single thread worm. Worm gears have either right or left threads, and their thread count will be different as well. This type of gear is used to reduce the speed of a rotating shaft. The speed reduction ratio will be about 50 percent if the worms have the same thread count as the CZPT gears.
The standard gear set transfers power at the peak load point of a tooth, called the pitchline. The worm gear moves slowly against the wheel’s metal surface. The worm gear is also more complex than the standard gear because the worm is sliding rather than rolling. Worm gears are hard to lubricate. Moreover, the sliding contact between the gear and worm increases the complexity of the gear set. They can be a great solution for applications where noise is a significant factor.
The axial pitch and circular pitch of the worm are equal. The ratio of these two indices determines the speed of transmission. For a worm reduction gearbox to work, the axial pitch and the circular pitch must match. The pitch angle of a worm can either be left-handed or right-handed. The lead of a worm is the distance one thread travels in one revolution. The lead angle is the angle tangent to the thread helix of the cylinder’s pitch. When a worm mesh is reversed, the majority of the mesh will be on the receding arc.
Worm gears generate more heat than their counterparts, so it is important to choose a worm reduction gearbox carefully. You will want to choose the material and amount of lubricating oil carefully. Worm gears are generally made of tin bronze. The paired worms are hardened to HRC45-55. In general, they are durable, lasting up to ten years. But they will wear out – and they wear out – so you may want to consider some other factors.

Shaft-mounted gearbox

Shaft-mounted gearboxes are designed for a variety of mining and quarry applications. Their high reliability and low maintenance make them an excellent choice in these types of applications. Shaft-mounted gearboxes also feature an optional backstop device that prevents the unit from rotating in one direction. This makes them an excellent choice for applications where alignment accuracy is an issue. Here are some of the benefits of using a shaft-mounted gearbox:
Shaft-mounted gearboxes are typically constructed of aluminium, and come in sizes ranging from 050 to 125. They feature a variety of reduction ratios and ensure optimum efficiency in all operating conditions. New S series sizes, 140 and 150, extend the application range of shaft-mounted gearmotors. They are both backed by a two-year warranty. For even greater peace of mind, Shaft-mounted gearboxes are available with a range of warranty options.
The most common applications for a Shaft-mounted gearbox include traction-driven applications where a low-speed shaft is required for operation. They also are suitable for applications without a foundation, where the motor is mounted next to the reducer. To prevent the gear drive from rotating, a torque arm is attached between the motor and the shaft. Small-sized shaft-mounted gear drives are usually made without motor mount kits, which can make them an excellent choice for conveying light loads.
Another important feature of a Shaft-mounted gearbox is its mounting position. The reduced motion through the drive is redirected through the shaft, creating additional forces. These additional forces can affect the performance of the gearbox, causing vibrations and noise. Consequently, it is important to replace worn or damaged belts on a regular basis. Further, shaft-mounted gearboxes can be affected by problems with other components and amplify vibrations.

1 speed gearbox

CZPT Group Components produces one speed gearboxes. These transmissions are produced in the CZPT Group’s Kassel plant. They are compact and robust, and are designed for easy integration. The Bosch Rexroth GD1 one-speed gearbox is easy to install horizontally or vertically. The Plug and Drive system integrates the gearbox with the existing cooling system. There are many other benefits to this gearbox.
With an ID.3 electric drive motor, the maximum torque is delivered at 16,000 rpm. This single-speed transmission offers high power density and excellent noise-reduction, making it ideal for electric vehicles. The e-drive motor is extremely quiet and requires precision manufacturing. The e-drive motor also enables a wide range of driving conditions. It can reverse when needed, and reaches its maximum speed at 16,000.
The single-speed gearbox is a standard feature on most electric vehicles. Some electric vehicles, such as the Porsche Taycan, will be equipped with a two-speed gearbox. This gearbox offers more top speed and range, but it is more complex than a standard single-speed gearbox. CZPT doesn’t need to add complexity to its electric vehicles. After all, a 355 horsepower family wagon is not likely to need a dual-speed gearbox.
In addition to simplifying the transmission, the patent claims also address improvements in structural design. Fig. 5 shows a schematic representation of a transmission 50′, wherein gear sets Z1 and Z4 are exchanged between partial transmissions. This switch matrix also reflects the synchronized gears and lastshelf gears. Hydraulically betatigte Lamellenkupplungen (HBA) also form a last-shelf gear.
Another advantage of the patent claim is that it offers numerous functional freedoms, which is especially valuable in the design of an automobile. One of the patent claims identifies a tosatzlicher middle gear that allows a driver to switch between second and third gears, with a single gearbox. In a conventional one-speed transmission, the tosatzlicher middle gear is attached to the second and first part gearbox. The latter has a second and third gear.