Warranty: 1 year
Applicable Industries: Manufacturing Plant, robotics
Customized support: OEM, ODM
Gearing Arrangement: Harmonic
Output Torque: depengs
Input Speed: 2000rpm
Output Speed: depends
Product name: Mechanical arm Harmonic drive Gearbox reducer harmonic with 50 ratio
Reduction ratio: 50
Rated speed when input 2000r/min: 51N.m
Allowable CZPT torque at start stop: 127Nm
Maximum allowable load torque on average: 72Nm
Maximum allowable moment torque: 242Nm
Back clerance: 17arcsec
Angular transmission accuracy: 1arcmin
Packaging Details: Carton with spaom inside the box to protect harmonic drive reducer.PE foam and carton for sample harmonic drive reducer. PE foam, carton, packing strap and plastic wrap for bulk order of harmonic drive reducer.
Mechanical arm Harmonic drive Gearbox reducer harmonic with 50 ratioModel harmonic drive reducerReduction ratioBacklashAngular transmission accuracyWeight255017arcsec1arcmin3kg Adopt international latest technology, uder innovative tech, strict QC, our independent R&D team synchronously adopt international craft and cast great quality harmonic drive reducer. With s-shaped teeth, our harmonic reducer with high precision, low noise and long life.
Features& Benefits With 10 years’ research of harmonic drive reducer, we master the core technology, adopt the latest international S-shape gear transmission mechanism for harmonic reducer. While maintaining the smoothness of the traditional involute tooth type, hot sale High Quality and Good Price Hard face speed reducer Twin Screw Plastic Extruder Gearbox it can improve the performance of precision, strength, rigidity, service life and so on.
Four advantages of our Harmonic Reducer
S-shaped teeth of harmonic reducer
Compared with the traditional involute tooth, this product is manufactured by our self-developed S-shaped tooth process which can comprehensively improve the performance of precision, strength, rigidity and service life.
Long Lifespanof harmonic reduce
With the S-shaped tooth manufacturing technology, the generator deformation required for gear occlusion is small, which reduces the concentrated stress on the bearing of the wave generator, and the service life of the whole machine can be as long as 10,000h.
High Precisionof harmonic reducer
Through the S-shaped tooth manufacturing process, the number of gear bites reaches 1 third of the total number of teeth, and the error is averaged, so that the position accuracy and turning accuracy can reach very high requirements.
Low Noiseof harmonic reducer
Through the S-type tooth manufacturing process, in the operation of harmonic reducer, Heavy duty Hook Type H419 crane lifting snatch pulley block the tooth surface contact is large, the slip speed is small, and there is no sudden change, so the operation is stable, no impact, low noise.
Product Parameter There are 14, 17, 20, 25 and 32 models harmonic reducer. Detailed parameter as below
ModelReduction ratioRated speed when input 2000r/minAllowable CZPT torque at start stopMaximum allowable load torque on averageMaximum allowable moment torqueBack cleranceAngular transmission accuracy NmkgfmNmkgfmNmkgfmNmkgfmarcsecarcmin255571.212713727.32422517180828.4178181131233234111571.925711401436938912571.921722140143954571571.92292314014408426ApplicationHarmonic drive reducers are mainly applied in aerospace filed, industry robot, CNC machine, radar, data communication equipment, robotic arm, precision measuring instrument and etc.
Packaging & Three phase high voltage motor Squirrel cage high voltage motor AC high voltage induction motor Shipping
We adopt thick foam inside the carton to protect the harmonic drive reducer. DHL, FEDEX, TNT, EMS are ok for sample order. We also could provide sea transport for large quantity orders of harmonic gear reducers.
Company InformationWith leading position in instruments, HangZhou CZPT Mechanical & Electrical Equipment Co., Ltd owns more than 3,000 squares meters area for R&D, production and sales. 17 years’ experience in instruments, we are always seeking for greater perfection, keeping improving the production technology, offering better user experience.
Providing one-stop service of model select, installation CZPT and after-sales, Gear ratio 3-100 low noise precision planetary gearbox from China PLE60-L1-5 also with OEM, ODM to meet clients’ personalized demand. HangZhou CZPT will be your reliable partner in harmonic accurator field.
The Parts of a Gearbox
There are many parts of a Gearbox, and this article will help you understand its functions and components. Learn about its maintenance and proper care, and you’ll be on your way to repairing your car. The complexity of a Gearbox also makes it easy to make mistakes. Learn about its functions and components so that you’ll be able to make the best choices possible. Read on to learn more. Then, get your car ready for winter!
Gearboxes are fully integrated mechanical components that consist of a series of gears. They also contain shafts, bearings, and a flange to mount a motor. The terms gearhead and gearbox are not often used interchangeably in the motion industry, but they are often synonymous. Gearheads are open gearing assemblies that are installed in a machine frame. Some newer designs, such as battery-powered mobile units, require tighter integration.
The power losses in a gearbox can be divided into no-load and load-dependent losses. The no-load losses originate in the gear pair and the bearings and are proportional to the ratio of shaft speed and torque. The latter is a function of the coefficient of friction and speed. The no-load losses are the most serious, since they represent the largest proportion of the total loss. This is because they increase with speed.
Temperature measurement is another important preventive maintenance practice. The heat generated by the gearbox can damage components. High-temperature oil degrades quickly at high temperatures, which is why the sump oil temperature should be monitored periodically. The maximum temperature for R&O mineral oils is 93degC. However, if the sump oil temperature is more than 200degF, it can cause seal damage, gear and bearing wear, and premature failure of the gearbox.
Regardless of its size, the gearbox is a crucial part of a car’s drivetrain. Whether the car is a sports car, a luxury car, or a farm tractor, the gearbox is an essential component of the vehicle. There are two main types of gearbox: standard and precision. Each has its own advantages and disadvantages. The most important consideration when selecting a gearbox is the torque output.
The main shaft and the clutch shaft are the two major components of a gearbox. The main shaft runs at engine speed and the countershaft may be at a lower speed. In addition to the main shaft, the clutch shaft has a bearing. The gear ratio determines the amount of torque that can be transferred between the countershaft and the main shaft. The drive shaft also has another name: the propeller shaft.
The gears, shafts, and hub/shaft connection are designed according to endurance design standards. Depending on the application, each component must be able to withstand the normal stresses that the system will experience. Oftentimes, the minimum speed range is ten to twenty m/s. However, this range can differ between different transmissions. Generally, the gears and shafts in a gearbox should have an endurance limit that is less than that limit.
The bearings in a gearbox are considered wear parts. While they should be replaced when they wear down, they can be kept in service much longer than their intended L10 life. Using predictive maintenance, manufacturers can determine when to replace the bearing before it damages the gears and other components. For a gearbox to function properly, it must have all the components listed above. And the clutch, which enables the transmission of torque, is considered the most important component.
A gearbox is a fully integrated mechanical component that consists of mating gears. It is enclosed in a housing that houses the shafts, bearings, and flange for motor mounting. The purpose of a gearbox is to increase torque and change the speed of an engine by connecting the two rotating shafts together. A gearbox is generally made up of multiple gears that are linked together using couplings, belts, chains, or hollow shaft connections. When power and torque are held constant, speed and torque are inversely proportional. The speed of a gearbox is determined by the ratio of the gears that are engaged to transmit power.
The gear ratios in a gearbox are the number of steps a motor can take to convert torque into horsepower. The amount of torque required at the wheels depends on the operating conditions. A vehicle needs more torque than its peak torque when it is moving from a standstill. Therefore, the first gear ratio is used to increase torque and move the vehicle forward. To move up a gradient, more torque is required. To maintain momentum, the intermediate gear ratio is used.
As metal-to-metal contact is a common cause of gearbox failure, it is essential to monitor the condition of these components closely. The main focus of the proactive series of tests is abnormal wear and contamination, while the preventative tests focus on oil condition and additive depletion. The AN and ferrous density tests are exceptions to this rule, but they are used more for detecting abnormal additive depletion. In addition, lubrication is critical to the efficiency of gearboxes.
Daily maintenance is a critical aspect of the life cycle of a gearbox. During maintenance, you must inspect all gearbox connection parts. Any loose or damaged connection part should be tightened immediately. Oil can be tested using an infrared thermometer and particle counters, spectrometric analysis, or ferrography. You should check for excessive wear and tear, cracks, and oil leaks. If any of these components fail, you should replace them as soon as possible.
Proper analysis of failure patterns is a necessary part of any preventative maintenance program. This analysis will help identify the root cause of gearbox failures, as well as plan for future preventative maintenance. By properly planning preventative maintenance, you can avoid the expense and inconvenience of repairing or replacing a gearbox prematurely. You can even outsource gearbox maintenance to a company whose experts are knowledgeable in this field. The results of the analysis will help you create a more effective preventative maintenance program.
It is important to check the condition of the gearbox oil periodically. The oil should be changed according to its temperature and the hours of operation. The temperature is a significant determinant of the frequency of oil changes. Higher temperatures require more frequent changes, and the level of protection from moisture and water reduces by 75%. At elevated temperatures, the oil’s molecular structure breaks down more quickly, inhibiting the formation of a protective film.
Fortunately, the gear industry has developed innovative technologies and services that can help plant operators reduce their downtime and ensure optimal performance from their industrial gears. Here are 10 steps to ensure that your gearbox continues to serve its purpose. When you are preparing for maintenance, always keep in mind the following tips:
Regular vibration analysis is a vital part of gearbox maintenance. Increased vibration signals impending problems. Visually inspect the internal gears for signs of spiraling and pitting. You can use engineers’ blue to check the contact pattern of gear teeth. If there is a misalignment, bearings or housings are worn and need replacement. Also make sure the breathers remain clean. In dirty applications, this is more difficult to do.
Proper lubrication is another key factor in the life of gearboxes. Proper lubrication prevents failure. The oil must be free of foreign materials and have the proper amount of flow. Proper lubricant selection depends on the type of gear, reduction ratio, and input power. In addition to oil level, the lubricant must be regulated for the size and shape of gears. If not, the lubricant should be changed.
Lack of proper lubrication reduces the strength of other gears. Improper maintenance reduces the life of the transmission. Whether the transmission is overloaded or undersized, excessive vibration can damage the gear. If it is not properly lubricated, it can be damaged beyond repair. Then, the need for replacement gears may arise. However, it is not a time to waste a lot of money and time on repairs.