Product Description
Product Description
Chinese Factory Wholesale high Transmission ratio fender motor reducer rotary tiller gearbox
WRV-E series fender motor reducer rotary tiller gearbox Installed with radial thrust ball bearings, so it can support external load, torque rigidity, large allowable torque, can reduce the number of components required, easy installation. The revolution speed of WRV gears is slower and vibration is reduced, which can reduce the motor structure (input gear) and inertia.
fender motor reducer rotary tiller gearbox High precision, high rigidity, high torque, high load and other characteristics realize hollow design at the same time. After being hollowed out, the ease of use of the product is improved due to the variety of piping and cable layout options.
The fender motor reducer rotary tiller gearbox is developed on the basis of the traditional needle wheel reducer. It not only overcomes the shortcomings of the general needle pendulum transmission, but also has more advantages, such as long life, stable precision, high efficiency, smooth transmission, small size, Light weight, large reduction ratio range, etc. This RV reducer from FUBAO adopts a double support support mechanism and a pinwheel mechanism, even if a torque up to 6 times the rated torque is applied, the product will not be damaged, and the torsional rigidity is very large. Small backlash, small volume, large torque. In order to directly support large loads, main bearings (large angular contact ball bearings) are installed inside.
WRV-E series fender motor reducer rotary tiller gearbox mainly has the following characteristics:
A. Main bearing built-in mechanism
1. Improved reliability;
2. Total cost reduction;
3. Radial thrust ball bearings are installed, so they can support external loads, and the moment rigidity and allowable moment are large, which can reduce the number of required components;
4. The use of couplings and motor flanges makes the installation of the motor very simple.
B. 2-stage deceleration mechanism
1. Small vibration;
2. The revolution speed of the gear is slowed down, the vibration is reduced, and the direct connection part of the motor (input gear) can be reduced, and the inertia can be reduced.
C. Double column support mechanism
1. High torsional rigidity;
2. Strong impact resistance;
3. The crank shaft is supported by double columns in the reducer.
D. Rolling contact mechanism
1. Excellent starting power;
2. Small abrasion and long service life;
3. Small backlash (1arc.min).
Product Parameters
| WRV-E series | Specifications | WRV6E | WRV20E | WRV40E | WRV80E | WRV110E | WRV160E | WRV320E | WR450E |
| Rated output torque | 196 | 882 | 1666 | 2156 | 2940 | 3920 | 7056 | 17640 | |
| Reduction ratio | 31~103 | 57~161 | 57~153 | 57~153 | 81~175 | 81~171 | 81~185 | 81~192 | |
| Backlash | <=1 | ||||||||
Product Display
Detailed Photos
Application Case
Company Profile
HangZhou Fubao Electromechanical Technology Co., Ltd. was established in 2008, the company has a complete precision reducer design, production capacity. Set R & D, manufacturing, assembly and sales, more in the field of gear manufacturing has more than 10 years of background, in the manufacturing equipment is equipped with Switzerland Riesenhahl gear grinding machine, domestic Qinchuan gear grinding machine, hamai gear hobbing machine and domestic Xihu (West Lake) Dis. gear hobbing machine, Japan Yasaki TLGmazak CNC lathe, CNC milling machine and other fully CNC equipment, In addition, it is equipped with other advanced measuring equipment such as Japanese TTI gear detector, 3 coordinate measurement, reducer backlash measurement instrument and so on. In a strong manufacturing capacity at the same time, can be stable, continuous manufacturing of high-quality precision reducer products.
The precision reducer produced by our company has the characteristics of high structural rigidity, small back backlash, precise transmission and so on. It is widely used in various industries. Companies adhering to the concept of let customers participate in manufacturing, and strive to provide customers with more personalized services. In the field of precision transmission has a unique achievements. It is our CHINAMFG pursuit to make far-reaching contributions.
Certificate
FAQ
Q: Speed reducer grease replacement time
A: When sealing appropriate amount of grease and running reducer, the standard replacement time is 20000 hours according to the aging condition of the grease. In addition, when the grease is stained or used in the surrounding temperature condition (above 40ºC), please check the aging and fouling of the grease, and specify the replacement time.
Q: Delivery time
A: Fubao has 2000+ production base, daily output of 1000+ units, standard models within 7 days of delivery.
Q: Reducer selection
A: Fubao provides professional product selection guidance, with higher product matching degree, higher cost performance and higher utilization rate.
Q: Application range of reducer
A: Fubao has a professional research and development team, complete category design, can match any stepping motor, servo motor, more accurate matching. /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Motor, Machinery, Agricultural Machinery, Industrial Robot |
|---|---|
| Function: | Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction, Speed Increase, Slow Down The Motor Speed and Increase The Torque |
| Layout: | Cycloidal |
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Prolonging the Lifespan of Tiller Gearboxes: Essential Maintenance Practices
Proper maintenance is crucial for extending the lifespan of tiller gearboxes. Here are essential practices to consider:
- Regular Lubrication: Ensure that all moving parts of the gearbox are properly lubricated to reduce friction and wear. Use the recommended lubricants and follow the manufacturer’s guidelines.
- Cleanliness: Keep the gearbox clean and free from debris, dirt, and moisture. Regularly inspect and clean the exterior and vents to prevent contaminants from entering.
- Inspections: Periodically inspect the gearbox for any signs of damage, wear, or leaks. Replace any worn or damaged parts promptly to prevent further issues.
- Tighten Fasteners: Check and tighten all bolts, nuts, and fasteners to ensure that the gearbox remains securely assembled during operation.
- Alignment: Ensure proper alignment between the gearbox and the power source. Misalignment can lead to increased wear and decreased efficiency.
- Storage: If the tiller is not in use for an extended period, store it in a dry and sheltered location to protect the gearbox from environmental factors.
- Usage Guidelines: Operate the tiller within its recommended capacity and follow the manufacturer’s guidelines for usage and maintenance.
- Temperature Considerations: Avoid operating the tiller in extremely hot or cold temperatures, as this can affect the performance of the gearbox.
- Professional Servicing: If you’re unsure about maintenance tasks or encounter complex issues, consult the manufacturer’s manual or seek assistance from a professional technician.
By following these maintenance practices, you can significantly prolong the lifespan of your tiller gearbox, ensuring reliable performance and efficient soil preparation for your gardening and landscaping tasks.
Customization of Tiller Gearboxes for Gardening and Landscaping Needs
Tiller gearboxes can indeed be customized to cater to specific gardening and landscaping requirements. Manufacturers offer customization options to ensure that the gearbox meets the unique needs of different users:
Power and Torque: Users can choose gearbox models with varying power and torque capabilities to match the size of the gardening or landscaping task. Customization allows users to select the appropriate level of power for efficient soil cultivation.
Speed Settings: Some tiller gearboxes come with adjustable speed settings. Users can customize the speed of the gearbox to achieve the desired level of soil tillage and depth, making it suitable for different types of soil and gardening practices.
Attachment Compatibility: Tiller gearboxes are often used with various attachments such as tines, blades, and rotary tools. Customization options may include compatibility with specific attachments, allowing users to perform a variety of tasks with a single gearbox.
Shaft Options: Users can choose different types of output shafts based on the type of attachment they intend to use. This customization ensures that the gearbox can efficiently transmit power to the specific tool being employed.
Mounting Configurations: Different gardening and landscaping equipment may require specific mounting configurations for the gearbox. Customization allows users to select the appropriate mounting options for their equipment.
Control Mechanisms: Some tiller gearboxes offer customization in terms of control mechanisms. Users may have options for manual controls, electric controls, or hydraulic controls, depending on their preference and equipment setup.
Size and Dimensions: Depending on the available space and the specific equipment being used, users can choose tiller gearbox models with dimensions that best fit their setup.
Sealing and Protection: Users operating in particularly harsh or dusty environments may request enhanced sealing and protection features for the gearbox to ensure longevity.
By offering customization options, manufacturers allow users to tailor the tiller gearbox to their exact needs, resulting in more efficient and effective gardening and landscaping operations.
Industries and Applications Using Tiller Gearboxes
Tiller gearboxes find applications in various industries and settings where soil cultivation, landscaping, and gardening tasks are essential:
- Agriculture: Tiller gearboxes are widely used in agriculture for soil preparation, tilling, and seedbed preparation in both large-scale and small-scale farming operations.
- Gardening and Landscaping: Gardeners and landscapers use tiller gearboxes to cultivate soil, create flower beds, prepare garden plots, and maintain lawns.
- Horticulture: Tiller gearboxes play a crucial role in horticulture by helping with soil aeration, weed control, and planting in greenhouse environments.
- Groundskeeping and Sports Fields: Groundskeepers use tiller gearboxes to maintain sports fields, golf courses, and public parks by ensuring proper soil conditions and grass growth.
- Commercial Nurseries: Commercial nurseries use tiller gearboxes for soil mixing, preparation of planting beds, and propagation of plants.
- Homeowners: Many homeowners use tiller gearboxes for personal gardening and landscaping projects, such as preparing flower beds and vegetable gardens.
Tiller gearboxes are versatile tools that contribute to efficient and effective soil cultivation and landscaping practices across various industries.
editor by CX 2024-01-16